02-基础配置 02-基础配置 02-基础配置

01-配置准备 01-配置准备 01-配置准备

ExtremeWare 7.8 Command Reference Guide 3 Contents Preface Chapter 1Command Reference Overview Chapter 2Commands for Accessing the Switch clear account lockout 74 clear session 75 configure account 76 configure account password-policy char-validation 78 configure account password-policy history 80 configure account password-policy lockout-on-login-failures 81 configure account password-policy maxage 82 configure account password-policy min-pwd-length 83 configure banner 85 configure banner netlogin 86 configure dns-client add 87 configure dns-client add domain-suffix 88 configure dns-client add name-server 89 configure dns-client default-domain 90 configure dns-client delete 91 configure dns-client delete domain-suffix 92 configure dns-client delete name-server 93 configure idletimeouts 94 configure time 95 configure timezone 96

ZXR10 8900（V2.8.01）系列万兆路由交换机 用户手册（上册） 资料版本：20070604-R1.0 产品版本：V2.8.01 策 划 中兴通讯学院 文档开发部 编 著 叶 威 审 核 田 平 * * * * 中兴通讯股份有限公司 地址：深圳市高新技术产业园科技南路中兴通讯大厦 邮编：518057 技术支持网站：http://support.zte.com.cn 客户支持中心热线：（0755）26770800 800-830-1118 传真：（0755）26770801 E-mail：[email protected] * * * * 编号：sjzl20071540

Undocumented Cisco Commands Undocumented Cisco Commands Undocumented Cisco Commands Undocumented Cisco Commands Undocumented Cisco Commands Undocumented Cisco Commands Undocumented Cisco Commands Undocumented Cisco Commands Undocumented Cisco Commands

H3C SecPath系列安全产品 操作手册(V1.07) H3C SecPath系列安全产品 操作手册(V1.07) H3C SecPath系列安全产品 操作手册(V1.07) H3C SecPath系列安全产品 操作手册(V1.07) H3C SecPath系列安全产品 操作手册(V1.07)

Sniffer Pro 47_Getting Started Guide Sniffer Pro 47_Getting Started Guide Sniffer Pro 47_Getting Started Guide Sniffer Pro 47_Getting Started Guide Sniffer Pro 47_Getting Started Guide Sniffer Pro 47_Getting Started Guide

cat6000-sup2cvk8.7-3-2.bin cat6000-sup2cvk8.7-3-2.bin cat6000-sup2cvk8.7-3-2.bin cat6000-sup2cvk8.7-3-2.bin cat6000-sup2cvk8.7-3-2.bin cat6000-sup2cvk8.7-3-2.bin

asa708-k8.bin asa708-k8.bin asa708-k8.bin asa708-k8.bin asa708-k8.bin asa708-k8.bin

ASDM-522.BIN ASDM-522.BIN ASDM-522.BIN ASDM-522.BIN ASDM-522.BIN ASDM-522.BIN

pix634 pix634 pix634 pix634 pix634 pix634 pix634

内容很详细，包括： SDM安装与配置 准备工作: 1.PC一台 2.SDM安装包(论坛CCNP讨论区就有) 3.JAVA虚拟机(其官网上有最新版,可以在线安装) 4.虚拟网卡(百度一大堆,我用的是泡泡鱼V1.2的) 安装步骤: 1.程序安装就不细说了,一阵NEXT就OK了… 2.在IE属性中做一个小小的设置: (选中此项!) 2.虚拟网卡安装好后,在PC右下角会显示一个网络连接的图标.双击打开它,设置好IP&MASK!^ ………………………………

pix722 ios pix722 ios pix722 ios pix722 ios

联想官方的包含ThinkPad SL400, SL400c, SL500, and SL500c 的拆机方法，很详细。

c3550-i9q3l2-mz.122-25.SE c3550-i9q3l2-mz.122-25.SE c3550-i9q3l2-mz.122-25.SE c3550-i9q3l2-mz.122-25.SE

来自于Careercert的825 testinside最新题库，共152题，PDF版本。

pix802.bin pix802.bin pix802.bin pix802.bin

集合了H3C路由交换的所有配置命令以及详细的解释，很不错，相当的详细了。

第2章 简介 本主题提供IBM System x3850 X5 和 x3950 X5 7145、7146、7143和7191型的简介。

用于将IBM SYSTEM X3850 X5 7143QEB服务器的UEFI Firmware升级到2018年5月29日发行的版本。

用于升级IBM SYSTEM X 3850 X5 7143QEB的FPGA至2014年3月26日发行的版本。

用于将服务器IBM SYSTEM X3850 X5 7143QEB的IMM Firmware升级到2018年的版本。

ESXi_Installable_and_vCenter_Server_Documentation 包含13个文档； Availability_Guide Datacenter_Administration_Guide ESXi_Configuration_Guide ESXi_Installable_and_vCenter_Server_Setup_Guide Fibre_Channel_SAN_Configuration_Guide Getting_Started_with_ESXi_Installable Introduction_to_vSphere iSCSI_SAN_Configuration_Guide Setup_for_Failover_Clustering_and_Microsoft_Cluster_Services Upgrade_Guide Virtual_Machine_Administration_Guide vSphere_Documentation_Roadmap_ESXi_Installable

The ArubaOS command line interface (CLI) allows you to configure and manage your controllers. The CLI is accessible from a local console connected to the serial port on the controllers or through a Telnet or Secure Shell (SSH) session from a remote management console or workstation. What’s New In ArubaOS 6.0 The following commands have been added in the ArubaOS 6.0 Command Line Interface. Note: Telnet access is disabled by default on Dell controllers. To enable Telnet access, enter the telnet cli command from a serial connection or an SSH session, or in the WebUI navigate to the Configuration > Management > General page. Command Description aaa dns-queryperiod Configure how often the controller should generate a DNS request to cache the IP address for a RADIUS server identified via its fully qualified domain name (FQDN). ap spectrum localoverride Convert an AP or AM into a spectrum monitor by adding it to the spectrum local-override list. ipv6 enable This command enables IPv6 packet processing globally. This option is disabled by default. local-userdbremote- node This command adds a Remote Node to the Remote Node whitelist. You can also delete the whitelist entry using this command. remote-node-localip This command configures the switch-IP address and preshared key for the local Remote Node on a master Remote Node. remote-nodemasterip This command configures the IP address and preshared key for the master Remote Node on a local Remote Node. remote-node-profile The remote-node-profile command lets you create a Remote Node profile. Once in Remote Node profile configuration mode, you can issue any of the following commands to define the values you want to assign to that profile. rf am-scan-profile Configure an Air Monitor (AM) scanning profile. rf spectrum-profile Define the spectrum band and device ageout times used by a spectrum monitor radio. show ap debug crash-info Show crash log information (if it exists) for an individual AP. The stored information is cleared from the flash after the AP reboots. show ap spectrum ap-list This command shows spectrum data seen by an access point that has been converted to a spectrum monitor. show ap spectrum channel-metrics This command shows channel quality, availability and utilization metrics as seen by a spectrum monitor. show ap spectrum channel-summary This command displays a summary of the 802.11a or 802.11g channels seen by a spectrum monitor. show ap spectrum client-list This command shows details for clients seen by a specified spectrum monitor. show ap spectrum debug monitors Show a detailed description of all spectrum monitors on the controller.

cisco 广域网应用服务配置向导;cisco 广域网应用服务配置向导;cisco 广域网应用服务配置向导;cisco 广域网应用服务配置向导;

Cisco SRE Service Module Congfiguration and Installation Guide!!

12-IBM网络配置命令12-IBM网络配置命令12-IBM网络配置命令

11-IP语音配置命令11-IP语音配置命令11-IP语音配置命令

10-可靠性配置命令10-可靠性配置命令10-可靠性配置命令

09-拨号配置命令09-拨号配置命令09-拨号配置命令

08-服务质量配置命令08-服务质量配置命令08-服务质量配置命令

08-安全配置08-安全配置08-安全配置

07-组播协议配置07-组播协议配置07-组播协议配置

05-网络协议配置05-网络协议配置05-网络协议配置

04-广域网协议配置 04-广域网协议配置 04-广域网协议配置

03-接口配置 03-接口配置 03-接口配置