lijialiang_haha的博客

msp430x21x2_1.c Software Toggle P1.0 msp430x21x2_1_vlo.c Software Toggle P1.0, MCLK = VLO/8 msp430x21x2_lpm3.c Basic Clock, LPM3 Using WDT ISR, 32kHz ACLK msp430x21x2_lpm3_vlo.c Basic Clock, LPM3 Using WDT ISR, VLO ACLK msp430x21x2_nmi.c Configure RST/NMI as NMI msp430x21x2_p1_01.c Software Poll P1.3, Set P1.0 if P1.3 = 1 msp430x21x2_p1_02.c Software Port Interrupt Service on P1.3 from LPM4 msp430x21x2_p1_03.c Poll P1 With Software with Internal Pull-up msp430x21x2_adc10_01.c ADC10, Sample A0, AVcc Ref, Set P1.0 if A0 > 0.5*AVcc msp430x21x2_adc10_02.c ADC10, Sample A0, 1.5V Ref, Set P1.0 if A0 > 0.2V msp430x21x2_adc10_03.c ADC10, Sample A10 Temp, Set P1.0 if Temp ++ ~2C msp430x21x2_adc10_04.c ADC10, Sample A0, Signed, Set P1.0 if A0 > 0.5*AVcc msp430x21x2_adc10_05.c ADC10, Sample A11, Lo_Batt, Set P1.0 if AVcc < 2.3V msp430x21x2_adc10_06.c ADC10, Output Internal Vref on P2.4 & ADCCLK on P1.0 msp430x21x2_adc10_07.c ADC10, DTC Sample A0 64x, AVcc, Repeat Single, DCO msp430x21x2_adc10_08.c ADC10, DTC Sample A0 64x, 1.5V, Repeat Single, DCO msp430x21x2_adc10_09.c ADC10, DTC Sample A10 64x, 1.5V, Repeat Single, DCO msp430x21x2_adc10_10.c ADC10, DTC Sample A2-0, AVcc, Single Sequence, DCO msp430x21x2_adc10_11.c ADC10, Sample A0, 1.5V, TA1 Trig, Set P1.0 if > 0.5V msp430x21x2_adc10_12.c ADC10, Sample A7, 1.5V, TA1 Trig, Ultra-Low Pwr msp430x21x2_adc10_13.c ADC10, DTC Sample A1 32x, AVcc, TA0 Trig, DCO msp430x21x2_adc10_14.c ADC10, DTC Sample A1-0 32x, AVcc, Repeat Seq, DCO msp430x21x2_adc10_15.c ADC10, DTC Sample A10 32x to Flash, Int Ref, DCO msp430x21x2_adc10_16.c ADC10, DTC Sample A0 -> TA1, AVcc, DCO msp430x21x2_adc10_17.c ADC10, DTC Sample A0 -> TA1, AVcc, HF XTAL msp430x21x2_adc10_18.c ADC10, DTC Sample A1/0 -> TA1/2, 2.5V, HF XTAL msp430x21x2_adc10_19.c ADC10, DTC Sample A0 64x, AVcc, HF XTAL msp430x21x2_adc10_20.c ADC10, DTC Sample A0 2-Blk Cont. Mode, AVcc, HF XTAL msp430x21x2_adc10_temp.c ADC10, Sample A10 Temp and Convert to oC and oF msp430x21x2_flashwrite_01.c Flash In-System Programming, Copy SegC to SegD msp430x21x2_flashwrite_03.c Flash In-System Programming w/ EEI, Copy SegC to SegD msp430x21x2_flashwrite_04.c Flash In-System Programming w/ EEI, Copy SegD to A/B/C msp430x21x2_clks.c Basic Clock, Output Buffered SMCLK, ACLK and MCLK/10 msp430x21x2_fll_01.c Basic Clock, Implement Auto RSEL SW FLL msp430x21x2_fll_02.c Basic Clock, Implement Cont. SW FLL with Auto RSEL msp430x21x2_hfxtal.c Basic Clock, MCLK Sourced from HF XTAL msp430x21x2_hfxtal_nmi.c Basic Clock, LFXT1/MCLK Sourced from HF XTAL, NMI msp430x21x2_rosc.c DCOCLK Biased with External Resistor Rosc msp430x21x2_dco_flashcal.c DCO Calibration Constants Programmer msp430x21x2_ta_01.c Timer_A, Toggle P1.0, TACCR0 Cont. Mode ISR, DCO SMCLK msp430x21x2_ta_02.c Timer_A, Toggle P1.0, TACCR0 Up Mode ISR, DCO SMCLK msp430x21x2_ta_03.c Timer_A, Toggle P1.0, Overflow ISR, DCO SMCLK msp430x21x2_ta_04.c Timer_A, Toggle P1.0, Overflow ISR, 32kHz ACLK msp430x21x2_ta_05.c Timer_A, Toggle P1.0, TACCR0 Up Mode ISR, 32kHz ACLK msp430x21x2_ta_06.c Timer_A, Toggle P1.0, TACCR1 Cont. Mode ISR, DCO SMCLK msp430x21x2_ta_07.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, DCO SMCLK msp430x21x2_ta_08.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, 32kHz ACLK msp430x21x2_ta_09.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, HF XTAL ACLK msp430x21x2_ta_10.c Timer_A, Toggle P1.1/TA0, Up Mode, DCO SMCLK msp430x21x2_ta_11.c Timer_A, Toggle P1.1/TA0, Up Mode, 32kHz ACLK msp430x21x2_ta_12.c Timer_A, Toggle P1.1/TA0, Up Mode, HF XTAL ACLK msp430x21x2_ta_13.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, DCO SMCLK msp430x21x2_ta_14.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, 32kHz ACLK msp430x21x2_ta_15.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, HF XTAL ACLK msp430x21x2_ta_16.c Timer_A, PWM TA1-2, Up Mode, DCO SMCLK msp430x21x2_ta_17.c Timer_A, PWM TA1-2, Up Mode, 32kHz ACLK msp430x21x2_ta_18.c Timer_A, PWM TA1-2, Up Mode, HF XTAL ACLK msp430x21x2_ta_19.c Timer_A, PWM TA1-2, Up/Down Mode, DCO SMCLK msp430x21x2_ta_20.c Timer_A, PWM TA1-2, Up/Down Mode, 32kHz ACLK msp430x21x2_ta_21.c Timer_A, PWM TA1-2, Up/Down Mode, HF XTAL ACLK msp430x21x2_ta_22.c Timer_A, Ultra-Low Pwr Pulse Accumulator msp430x21x2_ta_01.c Timer_A, Toggle P1.0, TACCR0 Cont. Mode ISR, DCO SMCLK msp430x21x2_ta_02.c Timer_A, Toggle P1.0, TACCR0 Up Mode ISR, DCO SMCLK msp430x21x2_ta_03.c Timer_A, Toggle P1.0, Overflow ISR, DCO SMCLK msp430x21x2_ta_04.c Timer_A, Toggle P1.0, Overflow ISR, 32kHz ACLK msp430x21x2_ta_05.c Timer_A, Toggle P1.0, TACCR0 Up Mode ISR, 32kHz ACLK msp430x21x2_ta_06.c Timer_A, Toggle P1.0, TACCR1 Cont. Mode ISR, DCO SMCLK msp430x21x2_ta_07.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, DCO SMCLK msp430x21x2_ta_08.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, 32kHz ACLK msp430x21x2_ta_09.c Timer_A, Toggle P1.0-3, Cont. Mode ISR, HF XTAL ACLK msp430x21x2_ta_10.c Timer_A, Toggle P1.1/TA0, Up Mode, DCO SMCLK msp430x21x2_ta_11.c Timer_A, Toggle P1.1/TA0, Up Mode, 32kHz ACLK msp430x21x2_ta_12.c Timer_A, Toggle P1.1/TA0, Up Mode, HF XTAL ACLK msp430x21x2_ta_13.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, DCO SMCLK msp430x21x2_ta_14.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, 32kHz ACLK msp430x21x2_ta_15.c Timer_A, Toggle P1.1/TA0, Up/Down Mode, HF XTAL ACLK msp430x21x2_ta_16.c Timer_A, PWM TA1-2, Up Mode, DCO SMCLK msp430x21x2_ta_17.c Timer_A, PWM TA1-2, Up Mode, 32kHz ACLK msp430x21x2_ta_18.c Timer_A, PWM TA1-2, Up Mode, HF XTAL ACLK msp430x21x2_ta_19.c Timer_A, PWM TA1-2, Up/Down Mode, DCO SMCLK msp430x21x2_ta_20.c Timer_A, PWM TA1-2, Up/Down Mode, 32kHz ACLK msp430x21x2_ta_21.c Timer_A, PWM TA1-2, Up/Down Mode, HF XTAL ACLK msp430x21x2_ta_22.c Timer_A, Ultra-Low Pwr Pulse Accumulator msp430x21x2_wdt_01.c WDT, Toggle P1.0, Interval Overflow ISR, DCO SMCLK msp430x21x2_wdt_02.c WDT, Toggle P1.0, Interval Overflow ISR, 32kHz ACLK msp430x21x2_wdt_04.c WDT+ Failsafe Clock, DCO SMCLK msp430x21x2_wdt_05.c Reset on Invalid Address fetch, Toggle P1.0 msp430x21x2_wdt_06.c WDT+ Failsafe Clock, 32kHz ACLK msp430x21x2_uscia0_uart_01_115k.c USCI_A0, 115200 UART Echo ISR, DCO SMCLK4 msp430x21x2_uscia0_uart_01_115k_lpm.c USCI_A0, 115200 UART Echo ISR, DCO SMCLK, LPM4 msp430x21x2_uscia0_uart_01_19200.c USCI_A0, 19200 UART Echo ISR, DCO SMCLK msp430x21x2_uscia0_uart_01_19200_2.c USCI_A0, UART 19200 Echo ISR, HF XTAL SMCLK msp430x21x2_uscia0_uart_01_9600.c USCI_A0, 9600 UART Echo ISR, DCO SMCLK msp430x21x2_uscia0_uart_05_9600.c USCI_A0, Ultra-Low Pwr UART 9600 Echo ISR, 32kHz ACLK msp430x21x2_uscia0_uart_06_9600.c USCI_A0, Ultra-Low Pwr UART 9600 String, 32kHz ACLK msp430x21x2_uscia0_uart_07_9600.c USCI_A0, Ultra-Low Pwr UART 9600 RX/TX, 32kHz ACLK msp430x21x2_uscia0_uart_08_9600.c USCI_A0, UART 9600 Full-Duplex Transceiver, 32kHz ACLK msp430x21x2_uscia0_spi_01.c USCI_A0, SPI Interface to HC164 Shift Register msp430x21x2_uscia0_spi_02.c USCI_A0, SPI Interface to HC165 Shift Register msp430x21x2_uscia0_spi_03.c USCI_A0, SPI Interface to HC165/164 Shift Registers msp430x21x2_uscia0_spi_09.c USCI_A0, SPI 3-Wire Master Incremented Data msp430x21x2_uscia0_spi_10.c USCI_A0, SPI 3-Wire Slave Data Echo msp430x21x2_uscib0_spi_01.c USCI_B0, SPI Interface to TLC549 8-Bit ADC msp430x21x2_uscib0_spi_02.c USCI_B0, SPI Interface to TLV1549 10-Bit ADC msp430x21x2_uscia0_irda_01.c USCI_A0 IrDA External Loopback Test, 8MHz SMCLK msp430x21x2_uscia0_irda_02.c USCI_A0 IrDA Monitor, 8MHz SMCLK msp430x21x2_uscia0_irda_03.c USCI_A0 IrDA Physical Layer Comm, 8MHz SMCLK msp430x21x2_uscib0_i2c_02.c USCI_B0 I2C Master Interface to PCF8574, Read/Write msp430x21x2_uscib0_i2c_03.c USCI_B0 I2C Master Interface to DAC8571, Writeve msp430x21x2_uscib0_i2c_04.c USCI_B0 I2C Master RX single bytes from MSP430 Slave msp430x21x2_uscib0_i2c_05.c USCI_B0 I2C Slave TX single bytes to MSP430 Master msp430x21x2_uscib0_i2c_06.c USCI_B0 I2C Master TX single bytes to MSP430 Slave msp430x21x2_uscib0_i2c_07.c USCI_B0 I2C Slave RX single bytes from MSP430 Master msp430x21x2_uscib0_i2c_08.c USCI_B0 I2C Master TX multiple bytes to MSP430 Slave msp430x21x2_uscib0_i2c_09.c USCI_B0 I2C Slave RX multiple bytes from MSP430 Master msp430x21x2_uscib0_i2c_10.c USCI_B0 I2C Master RX multiple bytes from MSP430 Slave msp430x21x2_uscib0_i2c_11.c USCI_B0 I2C Slave TX multiple bytes to MSP430 Master msp430x21x2_compA_01.c Comparator A, Poll input CA0, result in P5.1 msp430x21x2_compA_02.c Comparator A, Poll input CA0, CA exchange, result in P5.1 msp430x21x2_compA_04.c Comparator A, Poll input CA0, result in P5.1 msp430x21x2_compA_05.c Comparator A, Poll input CA0, interrupt triggered

AVR单片机，ATMEG64A 的中文资料。觉得对你有帮助请拿走。

FFC贴片封装，和大家分享，希望能给大家带来方便